English russian

Setting IP Telephone Adapter Grandstream GXW4008


Instructions for configuring VoIP Gateway Grandstream GXW 4008:

Analog GXW4008 FXS Gateway Series is an ideal solution for connecting one or more traditional lines to VOIP PBX phone system or provider. sip voip dapter has 8 FXS-interfaces for connecting analog telephones, built-in router with 2 x 10M/100M, PSTN Life Line for the backup connection in case of power failure, and RS232 serial port for administration.

SIP адаптер - Grandstream GXW-4008: — это оптимальный выбор, когда необходимо объединить городскую телефонную линию и IP-телефонию в единую внутреннюю телефонную сеть.SIP адаптер - Grandstream GXW-4008: — это оптимальный выбор, когда необходимо объединить городскую телефонную линию и IP-телефонию в единую внутреннюю телефонную сеть.

1. External connection to the Internet WAN:
To configure the adapter, you need to, first, to learn the parameters of your network:
Define these parameters can be read. At its "desktop" in the right
corner of the screen, click Network Connections tab, then follow the prompts on the
figures below:

Значек подключения по локальной сети: дважды нажать для отображения панели сетевого подключения

Состояние подключения по локальной сети: нажмите здесь чтобы узнать IP адрес и Gateway для настройки адаптера

Состояние подключения по локальной сети: эти данные надо указать в настройках адаптера

So: the options for configuring the adapter know!
Copy or record the data they need
to configure your SIP phone adapter!
2. We now proceed directly to the settings of the adapter:
Setting VoIP phone adapter (gateway): a web-interface:
In the absence of an external DHCP server, the voice menu to set
static IP address, connect the equipment to a computer and a DSL modem via a network cable
(RG45), as shown below. Next, launch a browser and connect to the device by typing in the browser line
assigned IP address. To meet these conditions you need to determine the IP-address of the adapter. There are two ways to do this, depending on the version of firmware installed in the adapter. If Option A does not work, try option B.
  WIRING ADAPTER:

Схема подключения VoIP шлюза Grandstream GXW4008:

A. Start on your computer, Internet access - the browser.
Enter data: IP-address of the device (default IP address of the adapter: 192.168.2.1), in the browsers address field, press Enter. If you entered the configuration of the gateway, then the window unit, you will be prompted for a password, the default is "admin", and then click "Login".
If the page does not open, try option "B", as set out below.
B. Connect to the FXS port (RJ-11), the gateway telephone. Sam gateway to connect
network via the WAN port (RG-45). On the telephone dial *** 129, to allow
access WEB gateway interface via the WAN port, and then *** 999 for restarting
gateway. To find the IP address of the WAN port on the telephone dial *** 02.
Gateway said the IP address of the WAN port. listen and record the settings. Now you can connect to the WEB interface of the gateway on the WAN port.
  Next, run on your computer, Internet access - the browser.
                    Enter data: IP-address of the device (for example, 192.168.2.1), from a voice message in the browsers address field, press Enter.
You will be prompted for a password, the default is "admin", and then click "Login".

Вход в конфигурацию SIP адаптера Grandstream GXW4008: введите пароль, по умолчанию "admin", а затем нажмите кнопку "Login".

In the window that Grandstream Device Configuration, click the tab BASIC SETTINGS:
 
   In the opened tab, activate «statically configured as: indicate
defined in your "Network Connections" data:
Static IP (IP address): XXX.XX.X.XXX - taking into account changes in the last three digits (0-225).
Default Router (Gateway (default gateway)): XXX.XX.XX
Subnet Mask (netmask): 255.255.255.0
DNS Server 1,2 specify any of your choice, or recommended: pr: 208.67.220.220,
sdr.: 208.67.222.222.
Enter data as shown below:

Настройка конфигурации SIP адаптера Grandstream GXW4008: В открывшемся окне Grandstream Device Configuration, нажмите вкладку BASIC SETTINGS:

Настройка конфигурации SIP адаптера Grandstream GXW4008: В открывшемся окне Grandstream Device Configuration, нажмите вкладку BASIC SETTINGS:

After making changes, click «Update», at the bottom of the window.
Then go to the tab, the following order: "PROFILE 1"," FXS PORTS "," ADVANCED SETTINGS ", and enter the required parameters.
Below are the options that you must enter to configure the adapter.

Таблица настроек : IP Telephone Adapter Grandstream GXW4008:


In accordance with the table, make these options in the tabs:
Tab: "PROFILE 1 ".

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка «PROFILE 1» , введите необходимые параметры

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка «PROFILE 1» , введите необходимые параметры

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка «PROFILE 1» , введите необходимые параметры

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка «PROFILE 1» , введите необходимые параметры

After making changes, click «Update», at the bottom of the window.
Tab: "FXS PORTS".

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка "FXS PORTS", введите необходимые параметры

After making changes, click «Update», at the bottom of the window.
Other settings are done in accordance with the figure below:
Tab: "ADVANCED SETTINGS".

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка «ADVANCED SETTINGS» , введите необходимые параметры

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка «ADVANCED SETTINGS» , введите необходимые параметры

Настройка конфигурации SIP адаптера Grandstream GXW4008:В окне Grandstream Device Configuration,   вкладка «ADVANCED SETTINGS» , введите необходимые параметры

After making changes, click «Update», at the bottom of the window.
To save changes on each tab, click the button «Reboot».
If you did everything in the tube to appear "beep", and the tab «Status», in paragraph «Registered» should be the value: YES!
The device is set up and ready to go!
Attention! We kindly request! Do not try to change or introduce unspecified higher settings SIP adapter, it can lead to unstable operation of the equipment and its failure. If you enter data in accordance with the above instructions, IP gateway does not work, a tube connected to the adapter phone no dial tone, you must carefully check the settings entered and to contact our customer support network subscribers s0s.mobi.   K#

Description of SIP VoIP Telephone Adapter Grandstream GXW4008

home >>>